Finisar Corporation FTLF8536P4BCx SFP+ Optical Transceivers
Finisar Corporation FTLF8536P4BCx Small Form-Factor Pluggable (SFP+) Optical Transceivers are designed for use in 25Gb/s data rate over multimode fiber. These transceivers feature a hot-plugged SFP+ footprint, 850nm Oxide Vertical-Cavity Surface-Emitting Laser (VCSEL) laser transmitter, duplex LC connector, and 1.2W of maximum power consumption. The FTLF8536P4BCx transceivers are compliant to IEEE802.3by, SFF-8472 Rev 12.2b, and SFF-8402g. The transceivers are compatible with SFF-8432a and applicable portions of SFF-8431 Rev. 4.1c.
Features
Up to 25.78Gb/s bi-directional data linksHot-pluggable SFP+ footprintBuilt-in digital diagnostic functions850nm Oxide VCSEL laser transmitterDuplex LC connectorRoHS compliant100m over M5F MMF (50/125μm OM4)
Finisar Newest
Finisar FDB-1051 QSFP+/QSFP28 Evaluation Board is used to evaluate, control, and configure all 40G LW, 40G-56G SW QSFP+, and 100G QSFP28 transceivers.
Date: 2019-03-19Finisar FTLC9558REPM QSFP28 Optical Transceiver Module is intended for use in 100 Gigabit Ethernet links over multimode fiber.
Date: 2019-03-19Finisar Corporation FTLF8536P4BCx SFP+ Optical Transceivers is designed for use in 25Gb/s data rate over multimode fiber.
Date: 2018-08-10Finisar FTL4S1QE1C Optical Transceiver is a hot-pluggable transceiver module ideal for designed for use in 40 Gigabit Ethernet links over duplex Multi-Mode Fiber (MMF).
Date: 2018-05-14Finisar FTLC1154RDPL QSFP28 Transceiver Modules is available at Mouser and are designed for use in 100Gigabit Ethernet links on up to 10km of single mode fiber.
Date: 2018-03-01Finisar FTLC1155RGPL QSFP28 Transceiver Modules are available at Mouser and are designed for use in 100Gigabit Ethernet links on up to 2km of single mode fiber.
Date: 2018-03-01Finisar FTLC1154SDPL QSFP28 Transceiver Modules is available at Mouser and are designed for use in 100Gigabit Ethernet and 4x28G OTN client interface links on up to 10km of single mode fiber.
Date: 2018-03-01Finisar FTLF1436P3BCL 25GE Long-Wavelength SFP+ Optical Transceivers are designed for use in Fibre Channel links with up to a 25.78Gb/s data rate and up to 10km link length.
Date: 2016-06-01
选择你的位置